Difference between revisions of "Tandberg TDV 1200"
m (→PCB images: added pictures of the processor board and RS-232 adapter) |
m (Added Problems and fixes section, based on my old notes) |
||
| Line 36: | Line 36: | ||
; ISO 2022 : Information processing, ISO 7-bit and 8-bit coded character sets and code extension techniques. | ; ISO 2022 : Information processing, ISO 7-bit and 8-bit coded character sets and code extension techniques. | ||
; ISO 6429 : Information processing, ISO 7-bit and 8-bit coded character sets, additional control functions for character, and imaging devices. | ; ISO 6429 : Information processing, ISO 7-bit and 8-bit coded character sets, additional control functions for character, and imaging devices. | ||
| + | |||
| + | == Problems and fixes == | ||
| + | If you get the error message | ||
| + | RAM Test Error 000000010 | ||
| + | and it can't be fixed by pressing the Reset button (under the terminal), you can try this: | ||
| + | # Remove the battery jumper (ST3). | ||
| + | # If the terminal is on, then turn it off. | ||
| + | # Power on the terminal, and put the battery jumper (ST3) back in its place. | ||
| + | # You are now in system test. Press the button labeled "Config". | ||
| + | # Verify that the configuration corresponds with the physical memory on the main board (processor board). | ||
| + | # Press EXIT twice, and answer YES to the question. | ||
| + | The terminal should now be working normally again | ||
| + | |||
==Documentation== | ==Documentation== | ||
Revision as of 15:51, 12 July 2020
| Tandberg TDV 1200 | |
|---|---|
| Manufacturer | Tandberg |
| Model | TDV 1200 |
| Communication | |
| Interfaces |
RS-232C, 20 mA current loop, RS-422-A (V.11) |
| Baud Rates | 50 to 38400 |
| Display | |
| Size | 14 inch |
| Refresh Rate | 70 Hz |
| Graphic Modes | |
| Type | Monochrome |
| Resolution | 720x454 |
| Firmware | |
| CPU | 80188 |
The Tandberg TDV 1200 terminal[1] was produced by Tandberg Data and sold by Norsk Data (ND) as product number 110140. The terminal has a 14 inch screen.[2]
Interfaces
The terminal has two communication links called "Line A" and "Line B". Each of those can have up to two physical adapters connected (you can only use one at a time). In addition the terminal has a peripheral interface. There is space for up to three optional adapters in the terminal. The standard interface is RS-232-C (V.24) designated "Internal Line A (Ch 4)".
Optional adapters
- Optional Line A (Ch 3): V.24 (RS-232-C), V.11 (RS-422-A), 20 mA Current Loop, Mouse adapter
- Line B (Ch 1): V.24 (RS-232-C), V.11 (RS-422-A), 20 mA Current Loop, Mouse adapter
- Peripheral interface (Ch 2): Centronics adapter, Magnetic Card Reader adapter
Specifications
The specifications for the terminal is based on the following international standards[1]:
- ISO 646
- 7-bit coded character set for information process interchange.
- ISO 2022
- Information processing, ISO 7-bit and 8-bit coded character sets and code extension techniques.
- ISO 6429
- Information processing, ISO 7-bit and 8-bit coded character sets, additional control functions for character, and imaging devices.
Problems and fixes
If you get the error message
RAM Test Error 000000010
and it can't be fixed by pressing the Reset button (under the terminal), you can try this:
- Remove the battery jumper (ST3).
- If the terminal is on, then turn it off.
- Power on the terminal, and put the battery jumper (ST3) back in its place.
- You are now in system test. Press the button labeled "Config".
- Verify that the configuration corresponds with the physical memory on the main board (processor board).
- Press EXIT twice, and answer YES to the question.
The terminal should now be working normally again
Documentation
ND-12.045.1 EN ND Display Terminal 1200 User Guide.
ND-12.045.2 EN ND Display Terminal 1200 Operator Guide.[3]
ND-12.047 EN ND Display Terminal 1200 Reference Manual.
ND-12.054.1 EN ND Display Terminal 1200 Functional Specifications.[1]
Images
Images of the terminal.
PCB images
Images of the printed circuit boards.
processor board
overview
- Error creating thumbnail: File with dimensions greater than 12.5 MP
- Error creating thumbnail: File with dimensions greater than 12.5 MP
barcode
J5 - from power board
J7 - to video board
- Error creating thumbnail: File with dimensions greater than 12.5 MP
U31 closeup
- Error creating thumbnail: File with dimensions greater than 12.5 MP
U15 closeup
U5 closeup
text, version, battery
solder side
solder side - text
RS-232 adapter and cable
power board
- Error creating thumbnail: File with dimensions greater than 12.5 MP
component side
- Error creating thumbnail: File with dimensions greater than 12.5 MP
solder side
text closeup
text closeup
References
- ↑ 1.0 1.1 1.2 "Norsk Data Library, document 12.054.1". http://www.sintran.com/sintran/library/libhw/libhw.html. Retrieved 21 April 2012.
- ↑ "Zwei 14-Zoll-Terminals mit Positiv Darstellung und ein Farbterminal bringt Tandberg Data neu auf der Markt". October 23, 1987. http://www.computerwoche.de/a/zwei-14-zoll-terminals-mit-positiv-darstellung-und-ein-farbterminal-bringt-tandberg-data-neu-auf-der-markt-die-beiden-monochrom-terminals-der-serie-tdv-1200-verfuegen-ueber-eine-bildwiederholfrequenz-von-70-hertz-eine-aufloesung-von-720-x-454-punkten-und,1161877. Retrieved April 20, 2013.
- ↑ Nork Data library, Hardware
| This article is a stub. You can help the Terminals Wiki by expanding it. |
