|Line 98:||Line 98:|
Latest revision as of 01:19, 30 July 2019
20 mA current loop
|Baud Rates||110, 150, 300, 600, 1200, 2400|
|Refresh Rate||60 Hz|
|Code Chart||DEC VT05|
The DEC VT05 DECscope terminal was introduced in November, 1970 at the Fall Joint Computer Conference. It was DEC's first raster video terminal. The VT05A supported baud rates up to 300 baud, the VT05B supported baud rates up to 2400 baud. The VT05 could transmit both lower and upper case, but could only display upper case.
The terminal consists of a single enclosure housing the screen, keyboard and discrete control circuitry. The control circuitry is housed in a small card cage housing 4 card modules interconnected by a backplane. The modules are designated M7000 (cursor control), M7001 (character generator and timing), M7002 (memory and memory timing), and either M7003 (interface) or M7004 (high speed interface).
The VT05 was more than a "glass tty" with the following features:
- cursor home
- directional cursor movement
- direct cursor positioning
- erase to end of line
- erase to end of screen
- fixed horizontal tab stops
The VT05 can overlay its alphanumeric display on top of an incoming RS-170 video signal. The combined display is available from a connector on the rear of the terminal.
- VT05 Engineering Drawings, 1974
- VT05 Alphanumeric Display Terminal Reference Manual, September, 1973
- VT05 Alphanumeric Display Terminal Maintenance Manual, April, 1973
- VT05 Alphanumeric Dispay Terminal Illustrated Parts Breakdown, May, 1973
- ↑ "Digital Equipment Corporation, 1957 to the Present". 1978. http://bitsavers.org/pdf/dec/_Books/DEC_1957_To_The_Present_1978.pdf. Retrieved January 16, 2018.
- ↑ Williams, Paul. "Digital's Video Terminals". http://vt100.net/vt_history. Retrieved March 4, 2012.
- ↑ "VT05 Alphanumeric Display Terminal Reference Manual". September, 1973. http://manx.classiccmp.org/details.php/1,3102. Retrieved January 26, 2013.
|This article is a stub. You can help the Terminals Wiki by expanding it.|