CodeChart:ANSI/ESC
User:Legalize/Control Sequences/CodeChart
ESC Sequences
Prefix | Acronym | Name | Parameters |
---|---|---|---|
_ | APC | Application Program Command | none |
B | BPH | Break Permitted Here | none |
T | CCH | Cancel Character | none |
d | CMD | Coding Method Delimiter | none |
P | DCS | Device Control String | none |
` | DMI | Disable Manual Input | none |
b | EMI | Enable Manual Input | none |
W | EPA | End of Protected Area | none |
G | ESA | End of Selected Area | none |
I | HTJ | Horizontal Tab with Justification | none |
H | HTS | Horizontal Tab Set | none |
a | INT | Interrupt | none |
~ | LS1R | Locking-Shift One Right | none |
n | LS2 | Locking-Shift Two | none |
} | LS2R | Locking-Shift Two Right | none |
o | LS3 | Locking-Shift Three | none |
l | LS3R | Locking-Shift Three Right | none |
U | MW | Message Waiting | none |
C | NBH | No Break Here | none |
E | NEL | Next Line | none |
[ | OSC | Operating System Command | none |
K | PLD | Partial Line Down | none |
L | PLU | Partial Line Up | none |
^ | PM | Privacy Message | none |
Q | PU1 | Private Use One | none |
R | PU2 | Private Use Two | none |
M | RI | Reverse Line Feed | none |
c | RIS | Reset to Initial State | none |
Z | SCI | Single Character Introducer | none |
X | SOS | Start Of String | none |
V | SPA | Start of Protected Area | none |
F | SSA | Start of Selected Area | none |
N | SS2 | Single-Shift Two | none |
O | SS3 | Single-Shift Three | none |
\ | ST | String Terminator | none |
S | STS | Set Transmit State | none |
J | VTS | Vertical Tab Set | none |