IBM 1050

From Terminals
Revision as of 19:47, 26 February 2026 by Legalize (talk | contribs) (update from gemini)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
IBM 1050
Ibm1050.gif
Manufacturer IBM
Model 1050
Lifetime
Introduced March, 1963
Communication
Baud Rates 75, 134.5

The IBM 1050 Data Communications System was introduced on March 12, 1963.[1] It was a modular teleprinter system designed for communication with IBM computers or other 1050 systems over communication lines.[2]

A typical 1050 system consisted of a 1051 control unit (big black box underneath the desk in the picture), and a 1052 keyboard/printer. This could be expanded with paper tape reader(1054) and punch(1055) or a card reader/punch(1442).

Architecture

The system operated in a half-duplex, asynchronous (start-stop) mode. Primary technical manuals specify the standard transmission speeds as 75 bps and 134.5 bps.[3]

The 134.5 bps rate was engineered to match the mechanical timing of the IBM Selectric mechanism. Each character was transmitted using a 9-bit frame consisting of one start bit, six data bits using the IBM Paper Tape Transmission Code (PTTC/BCD), one parity bit, and one stop bit.[3] This timing allowed for a continuous print speed of 14.8 characters per second.[2]

The 1050 did not utilize the RS-232 interface standard; instead, it connected to communication lines via internal IBM Line Adapters. These adapters allowed the system to operate on common-carrier switched networks or private leased lines, often in a multipoint configuration where multiple terminals shared a single line through polling and addressing.[2]

On many IBM System 360 mainframes, a bare 1052 keyboard/printer was hard-wired into the system for use as the console terminal.

Documentation

References

  1. Pugh, Emerson W.; Johnson, Lyle R.; Palmer, John H. (1991). IBM's 360 and Early 370 Systems. Cambridge, Mass.: MIT Press. p. 782. ISBN 0262517205. 
  2. 2.0 2.1 2.2 IBM (1965). "IBM 1050 Data Communication System: System Operation Reference Manual". http://bitsavers.org/pdf/ibm/1050/A24-3020-3_1050_System_Operation_Reference_Manual_196501.pdf. Retrieved 2026-02-26. 
  3. 3.0 3.1 IBM (1970). "IBM 2703 Transmission Control Component Description". http://bitsavers.org/pdf/ibm/2703/GA27-2703-2_2703_Transmission_Ctl_Component_Descr_Sep70.pdf. Retrieved 2026-02-26.