CodeChart:HP 2648A/HP 2648 Mode/ESC

Subpages of ESC

ESC Control Sequences

Prefix	Name	Parameters
)	Select Alternate Character Set	charset
1	Set Tab at Cursor	none
2	Clear Tab at Cursor	none
3	Clear All Tabs	none
4	Set Left Margin at Cursor	none
5	Set Right Margin at Cursor	none
6	Start Alphabetic Field	none
7	Start Numeric Field	none
8	Start Alphanumeric Field	none
@	Delay One Second	none
A	Cursor Up	none
B	Cursor Down	none
C	Cursor Right	none
D	Cursor Left	none
E	Reset Terminal	none
F	Cursor Home Down	none
G	Cursor Return	none
H	Home Cursor Including Transmit-Only Fields	none
I	Horizontal Tab	none
J	Clear Display	none
K	Erase to End of Line	none
L	Insert Line	none
M	Delete Line	none
N	Insert Character With Wrap On	none
O	Delete Character With Wrap	none
P	Delete Character	none
Q	Insert Character On	none
R	Insert Character Off	none
S	Roll Up	none
T	Roll Down	none
U	Next Page	none
V	Previous Page	none
W	Format Mode On	none
X	Format Mode Off	none
Y	Display Functions On	none
Z	Display Functions Off	none
[	Start Unprotected Field	none
]	End Field	none
^	Terminal Primary Status	none
_	Insert Non-displayed Terminator	none
`	Cursor Relative Sense	none
a	Cursor Absolute Sense	none
b	Keyboard Enable	none
c	Keyboard Disable	none
d	Enter	none
e	Binary Read	none
f	Modem Disconnect	none
g	Soft Reset	none
h	Home Cursor Excluding Transmit-Only Fields	none
i	Back Tab	none
j	Soft Key Display On	none
k	Soft Key Display Off	none
l	Memory Lock On	none
m	Memory Lock Off	none
p	f1 Key	none
q	f2 Key	none
r	f3 Key	none
s	f4 Key	none
t	f5 Key	none
u	f6 Key	none
v	f7 Key	none
w	f8 Key	none
x	Data Communications Self Test	none
y	Monitor Mode On	none
z	Terminal Self Test	none
{	Start Transmit-Only Field	none
~	Send Secondary Status	none