CodeChart:HP 2648A/HP 2648 Mode/ESC/Asterisk

Subpages of Asterisk

	0	1	2	3	4	5	6	7
0	NUL	DLE	SP	0	@	P	`	p
1	SOH	DC1	!	1	A	Q	a	q
2	STX	DC2	"	2	B	R	b	r
3	ETX	DC3	#	3	C	S	c	s
4	EOT	DC4	$	4	D	T	d	t
5	ENQ	NAQ	%	5	E	U	e	u
6	ACK	SYN	&	6	F	V	f	v
7	BEL	ETB	'	7	G	W	g	w
8	BS	CAN	(	8	H	X	h	x
9	HT	EM	)	9	I	Y	i	y
10	LF	SUB	*	:	J	Z	j	z
11	VT	ESC	+	;	K	[	k	{
12	FF	IS4	,	<	L	\	l	|
13	CR	IS3	-	=	M	]	m	}
14	SO	IS2	.	>	N	^	n	~
15	SI	IS1	/	?	O	_	o	DEL

ESC * Control Sequences

Prefix	Description	Parameters
a	Autoplot	command ...
b	Raster Dump Transfer	command ...
d	Graphics Display Control	command ...
l	Graphics Text Label	text CR text CR LF
m	Graphics Drawing Mode	command ...
p	Plot Control	command ...
r	Raster Dump Control	command ...
s	Graphics Status	parameter
t	Compatability Mode	parameter

ESC * a Autoplot Commands

Prefix	Description	Parameters
a	Start Autoplot	none
b	Stop Autoplot	none
c	Draw Autoplot Axes	none
d	Clear Menu	none
f	Display Autoplot Menu	none
g	Turn Off Autoplot Menu	none
h	Number of Columns	byte1 ... byte5
i	Column for X Data	byte1 ... byte5
j	Column for Y Data	byte1 ... byte5
k	Line Type	byte1 ... byte5
l	Min X	byte1 ... byte15
m	Max X	byte1 ... byte15
n	Min Y	byte1 ... byte15
o	Max Y	byte1 ... byte15
p	Units Between X Labels	byte1 ... byte15
q	Units Between X Tics	byte1 ... byte5
r	Units Between Y Labels	byte1 ... byte15
s	Units Between Y Tics	byte1 ... byte5
t	Skip Heading Lines	byte1 ... byte5
u	Number of Points	byte1 ... byte5
v	Draw Grid	byte1 ... byte5
w	Plot From Display	byte1 ... byte5
z	No Operation	none

ESC * b Raster Dump Transfer Commands

Prefix	Description	Parameters
w	Transfer Empty Scanline Data	0
w	Transfer Scanline Data	90

ESC * d Graphics Display Control Commands

Prefix	Description	Parameters
a	Clear Memory	none
b	Set Memory	none
c	Graphics Display On	none
d	Graphics Display Off	none
g	Zoom On	none
h	Zoom Off	none
i	Zoom Size	size
j	Zoom Position	x y
k	Graphics Cursor On	none
l	Graphics Cursor Off	none
m	Rubber Band Line On	none
n	Rubber Band Line Off	none
o	Move Absolute	x y
p	Move Relative	x y
z	No Operation	none

ESC * m Graphics Drawing Mode Commands

Prefix	Description	Parameter
a	Select Drawing Mode	drawing mode
b	Select Line Type	line type
c	Define Line Pattern	pattern scale
d	Define Area Pattern	row0 ... row7
e	Area Fill, Absolute	left bottom right top
f	Area Fill, Relative	left bottom right top
j	Set Relocatable Origin	x y
k	Set Relocatable Origin to Pen Position	none
l	Set Relocatable Origin to Cursor Position	none
m	Set Graphics Text Size	?
n	Set Graphics Text Direction	?
o	Turn On Character Slant	?
p	Turn Off Character Slant	?
q	Set Text Origin	?
r	Set Graphics Default Parameters	none
z	No Operation	none

ESC * m a Drawing Modes

Value	Description
0	No change
1	Clear
2	Set
3	Complement
4	Jam

ESC * m b Line Types

Value	Description
1	Solid line
2	User defined line pattern
3	User defined area pattern
4	Predefined pattern #1
5	Predefined pattern #2
6	Predefined pattern #3
7	Predefined pattern #4
8	Predefined pattern #5
9	Predefined pattern #6
10	Predefined pattern #7
11	Point plot

ESC * p Plot Control Commands

Prefix	Description	Parameter
a	Lift the pen	none
b	Lower the pen	none
c	Use graphics cursor position as new point	none
d	Draw a single dot at the current pen position	none
e	Set relocatable origin to current pen position	none
f	Use ASCII absolute format	none
g	Use ASCII incremental format	none
h	Use ASCII relocatable format	none
i	Use binary absolute format	none
j	Use binary short incremental format	none
k	Use binary incremental format	none
l	Use binary relocatable format	none
z	No operation	none

ESC * r Raster Dump Transfer Commands

Prefix	Description	Parameter
a	Start of Transfer	width s height t
b	End of Transfer	none
c	Erase Screen	none
d	Turn Video On	none