View source for CodeChart:Heathkit H19/ANSI Mode/ESC/CSI

[[:Special:PrefixIndex/{{FULLPAGENAME}}/|Subpages of {{SUBPAGENAME}}]]
{|
| valign="top" align="right" |
{{CodeChart
| title=Received
| a=#cuu
| b=#cud
| c=#cuf
| d=#cub
| h=#cup
| j=#ed
| k=#el
| l=#il
| m=#dl
| p=#dch
| lowerf=#hvp
| lowerh=#sm
| lowerl=#rm
| lowerm=#sgr
| lowern=#dsr
| lowerp=#pxmt
| lowerq=#px25
| lowerr=#pmbr
| lowers=#pscp
| loweru=#prcp
| lowerz=#pram
}}
| style="width: 2ex;" |
| valign="top" |
{{CodeChart
| title=Transmitted
| r=#cpr-report
}}
|-
| valign="top" |
{| class="wikitable"
|+ ESC [ Sequences
{{CodeDescriptionHeaderA}}
{{CodeDescriptionRowA|A|cuu|CUU|Cursor up|''Pn''<nowiki>=</nowiki>1}}
{{CodeDescriptionRowA|B|cud|CUD|Cursor down|''Pn''<nowiki>=</nowiki>1}}
{{CodeDescriptionRowA|C|cuf|CUF|Cursor forward|''Pn''<nowiki>=</nowiki>1}}
{{CodeDescriptionRowA|D|cub|CUB|Cursor backward|''Pn''<nowiki>=</nowiki>1}}
{{CodeDescriptionRowA|H|cup|CUP|Cursor position|''line''<nowiki>=</nowiki>1 <code>;</code> ''col''<nowiki>=</nowiki>1}}
{{CodeDescriptionRowA|J|ed|ED|Erase in display|[[#ed-params|''Ps'']]<nowiki>=</nowiki>0}}
{{CodeDescriptionRowA|K|el|EL|Ersae in line|[[#el-params|''Ps'']]<nowiki>=</nowiki>0}}
{{CodeDescriptionRowA|L|il|IL|Insert line|''Pn''<nowiki>=</nowiki>1}}
{{CodeDescriptionRowA|M|dl|DL|Delete line|''Pn''<nowiki>=</nowiki>1}}
{{CodeDescriptionRowA|P|dch|DCH|Delete character|''Pn''<nowiki>=</nowiki>1}}
{{CodeDescriptionRowA|f|hvp|HVP|Horizontal and vertical position|''line''<nowiki>=</nowiki>1 <code>;</code> ''col''<nowiki>=</nowiki>1}}
{{CodeDescriptionRowA|h|sm|SM|Set mode|[[#sm-modes|''Ps'']] <code>;</code>...}}
{{CodeDescriptionRowA|l|rm|RM|Reset mode|[[#rm-modes|''Ps'']] <code>;</code>...}}
{{CodeDescriptionRowA|m|sgr|SGR|Set graphic rendition|[[#sgr-params|''Ps'']]<nowiki>=</nowiki>0 <code>;</code>...}}
{{CodeDescriptionRowA|n|dsr|DSR|Cursor position report|<code>6</code>}}
{{CodeDescriptionRowA|p|pxmt|PXMT|Transmit page}}
{{CodeDescriptionRowA|q|px25|PX25|Transmit 25th line}}
{{CodeDescriptionRowA|r|pmbr|PMBR|Modify baud rate|[[#pmbr-rates|''Pn'']]}}
{{CodeDescriptionRowA|s|pscp|PSCP|Save cursor position}}
{{CodeDescriptionRowA|u|prcp|PRCP|Restore cursor position}}
{{CodeDescriptionRowA|z|pram|PRAM|Reset to power-up configuration}}
|}
|
| valign="top" |
{| class="wikitable"
|+ ESC [ Sequences
{{CodeDescriptionHeaderA}}
{{CodeDescriptionRowA|R|cpr-report|CPR|Cursor position report|''line'' <code>;</code> ''col''}}
|}
|-
| valign="top" |
{| id="ed-params" class="wikitable"
|+ ESC [ J Parameters
{{ValueDescriptionHeader}}
{{ValueDescriptionRow|0|Erase from cursor to end of screen}}
{{ValueDescriptionRow|1|Erase from start of screen to cursor}}
{{ValueDescriptionRow|2|Erase entire screen}}
|}

{| id="el-params" class="wikitable"
|+ ESC [ K Parameters
{{ValueDescriptionHeader}}
{{ValueDescriptionRow|0|Erase from cursor to end of line}}
{{ValueDescriptionRow|1|Erase from start of line to cursor}}
{{ValueDescriptionRow|2|Erase entire line}}
|}

{| id="sm-modes" class="wikitable"
|+ ESC [ h Parameters
{{ValueDescriptionHeaderA}}
{{ValueDescriptionRowA|2|KAM|Keyboard disabled}}
{{ValueDescriptionRowA|4|IRM|Insert character mode on}}
{{ValueDescriptionRowA|20|LNM|New line mode on}}
{{ValueDescriptionRowA|&gt;1|L25|Enable 25th line}}
{{ValueDescriptionRowA|&gt;2|KCL|No key click}}
{{ValueDescriptionRowA|&gt;3|HSM|Enable hold screen mode}}
{{ValueDescriptionRowA|&gt;4|CBL|Blinking block cursor}}
{{ValueDescriptionRowA|&gt;5|CDE|Cursor off}}
{{ValueDescriptionRowA|&gt;6|KSH|Keypad shifted}}
{{ValueDescriptionRowA|&gt;7|KAM|Alternate keypad mode}}
{{ValueDescriptionRowA|&gt;8|ALF|Auto line feed on receipt of CR}}
{{ValueDescriptionRowA|&gt;9|ACR|Auto CR on receipt of line feed}}
{{ValueDescriptionRowA|?2|HMD|Enter Heathkit H19 mode}}
{{ValueDescriptionRowA|?7|WAR|Wrap around at end of line}}
|}

{| id="rm-modes" class="wikitable"
|+ ESC [ l Parameters
{{ValueDescriptionHeaderA}}
{{ValueDescriptionRowA|2|KAM|Keyboard enabled}}
{{ValueDescriptionRowA|4|IRM|Insert character mode off}}
{{ValueDescriptionRowA|20|LNM|New line mode off}}
{{ValueDescriptionRowA|&gt;1|L25|Disable 25th line}}
{{ValueDescriptionRowA|&gt;2|KCL|Enable key click}}
{{ValueDescriptionRowA|&gt;3|HSM|Disable hold screen mode}}
{{ValueDescriptionRowA|&gt;4|CBL|Blinking underscore cursor}}
{{ValueDescriptionRowA|&gt;5|CDE|Cursor on}}
{{ValueDescriptionRowA|&gt;6|KSH|Keypad unshifted}}
{{ValueDescriptionRowA|&gt;7|KAM|Normal keypad mode}}
{{ValueDescriptionRowA|&gt;8|ALF|No auto line feed on receipt of CR}}
{{ValueDescriptionRowA|&gt;9|ACR|No auto CR on receipt of line feed}}
{{ValueDescriptionRowA|?7|WAR|Discard past end of line}}
|}

{| id="sgr-params" class="wikitable"
|+ ESC [ m Parameters
{{ValueDescriptionHeader}}
{{ValueDescriptionRow|0|Reverse video off}}
{{ValueDescriptionRow|7|Reverse video on}}
{{ValueDescriptionRow|10|Enter graphics mode}}
{{ValueDescriptionRow|11|Exit graphics mode}}
|}

{| id="pmbr-rates" class="wikitable"
|+ ESC [ r Parameters
{{ValueDescriptionHeader}}
{{ValueDescriptionRow|1|110 baud}}
{{ValueDescriptionRow|2|150 baud}}
{{ValueDescriptionRow|3|300 baud}}
{{ValueDescriptionRow|4|600 baud}}
{{ValueDescriptionRow|5|1200 baud}}
{{ValueDescriptionRow|6|1800 baud}}
{{ValueDescriptionRow|7|2000 baud}}
{{ValueDescriptionRow|8|2400 baud}}
{{ValueDescriptionRow|9|3600 baud}}
{{ValueDescriptionRow|10|4800 baud}}
{{ValueDescriptionRow|11|7200 baud}}
{{ValueDescriptionRow|12|9600 baud}}
|}
|}