DEC VT240
| DEC VT240 | |
|---|---|
 | |
| Manufacturer | DEC |
| Model | VT240 |
| Lifetime | |
| Introduced | January, 1984 |
| Discontinued | April, 1987 |
| Communication | |
| Interfaces |
RS-232C, 20 mA current loop |
| Baud Rates | 19200 |
| Character Modes | |
| Resolutions | 80x24, 132x24 |
| Matrix | 8x10, 5x10 |
| Graphic Modes | |
| Type | GrayScale |
| Resolution | 800x240 |
| Firmware | |
| Personalities |
DEC VT52, DEC VT100, Tektronix 4010, Tektronix 4014 |
The DEC VT240 terminal is a graphics terminal supporting DEC's ReGIS graphics commands as well as the Tektronix 4010 graphics commands. It was introduced in January, 1984.[1] It was discontinued in April, 1987.[2] The terminal base unit supports both grayscale and color monitors. When configured with a VR201 grayscale monitor, the terminal was sold as a VT240. When configured with the VR241 color monitor, the terminal was sold as a VT241.
Manx
- VT240 Schematic
- VT240 Series Programmer Pocket Guide, September, 1984
- VT240 Series Pocket Service Guide, October, 1984
- VT240 Series Programmer Reference Manual, October, 1984
- VT240 Series Technical Manual
- VT240 Field Maintenance Print Set, October, 1983
References
- ↑ DEC advertisement, Computerworld, January 16, 1984, pg. 48
- ↑ "DEC terminals retire VT240", Computerworld, April 27, 1987, pg. 8
