DEC VT240
DEC VT240 | |
---|---|
Manufacturer | DEC |
Model | VT240 |
Lifetime | |
Introduced | January, 1984 |
Discontinued | April, 1987 |
Communication | |
Interfaces |
RS-232C, 20 mA current loop |
Baud Rates | 19200 |
Character Modes | |
Resolutions | 80x24, 132x24 |
Matrix | 8x10, 5x10 |
Graphic Modes | |
Type | GrayScale |
Resolution | 800x240 |
Firmware | |
CPU | DEC T-11 |
Personalities |
DEC VT52, DEC VT100, DEC VT220, Tektronix 4010, Tektronix 4014 |
Software Libraries | |
gnuplot Name | regis |
The DEC VT240 terminal is a graphics terminal supporting DEC's ReGIS graphics commands as well as the Tektronix 4010 graphics commands. It was introduced in January, 1984.[1] It was discontinued in April, 1987.[2] The terminal base unit supports both grayscale and color monitors. When configured with a VR201 grayscale monitor, the terminal was sold as a VT240. When configured with the VR241 color monitor, the terminal was sold as a VT241.
Manx
- VT240 Series Owner's Manual, December, 1984
- VT240 Schematic
- VT240 Series Programmer Pocket Guide, September, 1984
- VT240 Series Pocket Service Guide, October, 1984
- VT240 Series Programmer Reference Manual, October, 1984
- VT240 Series Technical Manual
- VT240 Field Maintenance Print Set, October, 1983
Images
References
- ↑ DEC advertisement, Computerworld, January 16, 1984, pg. 48
- ↑ "DEC terminals retire VT240", Computerworld, April 27, 1987, pg. 8
This article is a stub. You can help the Terminals Wiki by expanding it. |