Difference between revisions of "DEC VT125"
m (casing) |
m (RGL/11) |
||
Line 34: | Line 34: | ||
* [http://manx.classiccmp.org/details.php/1,2945 VT125 Graphics Terminal User Guide], June, 1982 | * [http://manx.classiccmp.org/details.php/1,2945 VT125 Graphics Terminal User Guide], June, 1982 | ||
* [http://manx.classiccmp.org/details.php/1,3088 VT125 Field Maintenance Print Set], March, 1982 | * [http://manx.classiccmp.org/details.php/1,3088 VT125 Field Maintenance Print Set], March, 1982 | ||
+ | * [https://manx.classiccmp.org/details.php/1,18671 RGL/11 Programmers Reference Manual], August, 1982 | ||
{{References}} | {{References}} |
Revision as of 07:18, 6 February 2013
DEC VT125 | |
---|---|
Manufacturer | DEC |
Model | VT125 |
Lifetime | |
Introduced | July, 1981 |
Communication | |
Interfaces |
RS-232C, 20 mA current loop |
Baud Rates | 50, 75, 110, 134.5, 150, 200, 300, 600, 1200, 1800, 2000, 2400, 3600, 4800, 9600, 19200 |
Display | |
Size | 12-inch |
Phosphor | P4 white |
Character Modes | |
Resolutions | 80x24, 132x14 |
Matrix | 7x9 |
Firmware | |
CPU | Intel 8080A |
Personalities | DEC VT52 |
The DEC VT125 terminal was introduced in July, 1981.[1] It is a variant of the VT100 that includes a graphic display separate from the alphanumeric display. The graphics are displayed in a full bitmap manner instead of the waveform graphics used in the VT105.
A plug-in graphics board was available for the VT100 that would upgrade it to the VT125.[2]
Manx
- VT125 ReGIS Primer, May, 1982
- VT125 Graphics Terminal User Guide, June, 1982
- VT125 Field Maintenance Print Set, March, 1982
- RGL/11 Programmers Reference Manual, August, 1982
References
- ↑ "Enhancements Give DEC Minc Graphics, Floating-Point Unit", Computerworld, August 31, 1981, pg. 47
- ↑ DEC Advertisement, Computerworld, November 9, 1981, pg. 106